2m Flash - Use Fmuv3 Firmware 〈720p 2025〉

I'll help you create a feature for an using FMUV3 firmware (Betaflight target: MATEKF405 or similar F4 with 2MB flash). This feature will be a Blackbox logging manager with adaptive recording that optimizes flash storage. Feature: Adaptive Blackbox Manager for 2M Flash // File: src/main/drivers/adaptive_blackbox.c // Feature: Auto-manages 2MB flash with intelligent recording #include <stdbool.h> #include <stdint.h> #include "platform.h" #include "drivers/flash.h" #include "drivers/flash_m25p16.h" #include "drivers/time.h" #include "build/build_config.h"

if(strcmp(arg, "adaptive_bb") == 0) { char *subcmd = strtok(NULL, " "); if(subcmd == NULL) { // Show status cliPrintLinef("Adaptive Blackbox Status:"); cliPrintLinef("Flash total: %u bytes", flash_status.total_bytes); cliPrintLinef("Free: %u bytes (%u%%)", flash_status.free_bytes, 100 - flash_status.percent_used); cliPrintLinef("Est. recording: %d seconds", flash_status.estimated_log_seconds); cliPrintLinef("Resolution: %s", adaptive_bb_config.resolution == 0 ? "Low" : adaptive_bb_config.resolution == 1 ? "Normal" : "High"); cliPrintLinef("Auto erase: %s", adaptive_bb_config.auto_erase ? "ON" : "OFF"); cliPrintLinef("Dynamic rate: %s", adaptive_bb_config.dynamic_rate ? "ON" : "OFF"); } else if(strcmp(subcmd, "resolution") == 0) { uint8_t val = atoi(strtok(NULL, " ")); if(val <= 2) { adaptive_bb_config.resolution = val; cliPrintLinef("Resolution set to %d", val); } } else if(strcmp(subcmd, "auto_erase") == 0) { adaptive_bb_config.auto_erase = atoi(strtok(NULL, " ")); cliPrintLinef("Auto erase set to %d", adaptive_bb_config.auto_erase); } else if(strcmp(subcmd, "max_time") == 0) { adaptive_bb_config.max_log_seconds = atoi(strtok(NULL, " ")); cliPrintLinef("Max log time set to %d seconds", adaptive_bb_config.max_log_seconds); } else if(strcmp(subcmd, "dynamic") == 0) { adaptive_bb_config.dynamic_rate = atoi(strtok(NULL, " ")); cliPrintLinef("Dynamic rate set to %d", adaptive_bb_config.dynamic_rate); } } } 2m flash - use fmuv3 firmware

// Main feature: auto-configure blackbox on boot void adaptive_blackbox_init(void) { // Get flash geometry flash_status.total_bytes = flash_getSize(); flash_status.free_bytes = flash_getFreeSpace(); flash_status.used_bytes = flash_status.total_bytes - flash_status.free_bytes; flash_status.percent_used = (flash_status.used_bytes * 100) / flash_status.total_bytes; I'll help you create a feature for an

// Flash monitoring typedef struct flash_status_s { uint32_t total_bytes; uint32_t free_bytes; uint32_t used_bytes; uint8_t percent_used; uint16_t estimated_log_seconds; } flash_status_t; recording: %d seconds", flash_status

// Implementation would scan flash for log headers // For brevity: erase first 512KB (oldest quarter) flash_erase_sector(0, 512 * 1024);

// Configuration structure typedef struct adaptive_bb_s { uint8_t resolution; // 0=low, 1=normal, 2=high uint8_t auto_erase; // auto-erase oldest logs uint8_t priority_mode; // 0=quality, 1=duration uint16_t max_log_seconds; uint8_t dynamic_rate; // adjust rate based on flash remaining } adaptive_bb_t;